Answer External SIP calls

From PBXes

Answering SIP Calls

One of the defined features is answering calls to account-name@pbxes.org. This is actually slightly more advanced than simply that.

First off, all calls to account-name@pbxes.org will come in as incoming calls and get processed by your inbound routes. If you don't have a route that matches all calls (ie, trunk and CID blank), or the address you define (see example), you won't receive these calls.

Extensions are private. This means calls to <account-name>-<extension>@pbxes.org will look the same, by default, as <account-name>@pbxes.org calls. The following example illustrates how to set up this function:

   Incoming Route
      Trunk: username-salesdept
      CID Number: 
      
      Set Destination: Ring Group 2
   
   Incoming Route
      Trunk: 
      CID Number:

      Set Destination: Ring Group 1

Here calls to username-salesdept@pbxes.org will go to ring group 2, but all other calls will go to ring group 1.

If you're having trouble, try using the IP address (217.195.32.11) instead of pbxes.org

Information taken this forum post